Q-Mark Plywood

Set up by Trada in the UK, Q-Mark EN314-2 Class 3 glue bond plywood has a strict third party evaluation to ensure the manufacturing mill carry out all the necessary procedures and checks, so that the Plywood is in accordance or exceeds EN13986. Participating factories are monitored continuously on a monthly basis.

Q-Mark Plywood can be used both internally to a higher standard than the MLH Plywood above and also externally once it has been properly treated.

We stock Q-Mark Plywood in a range of thicknesses and cuts with other more unusual sizes being available to order with a minimum amount of 20 sheets. We also can supply full pallet loads for any project you may have.

Note we do not recommend buying anything lower than class 2 glue bond for flooring applications.

Q-Mark

Sizes Available

3.6 x 2440 x 1220mm (8x4ft)

3.6 x 1220 x 610mm (4x2ft)

5.5 x 2440 x 1220mm (8x4ft)

5.5 x 1220 x 610mm (4x2ft)

9 x 2440 x 1220mm (8x4ft)

12 x 2440 x 1220mm (8x4ft)

18 x 2440 x 1220mm (8x4ft)

25 x 2440 x 1220mm (8x4ft)

2440 x 610mm (8x2ft) & 1220 x 1220mm (4x4ft) are available to order upon

We work in and offer our services across Brighton, Hove, Worthing, Chichester, Crawley, Burgess Hill, Haywards Heath, Horsham, East Grinstead, Guildford, Woking, Leatherhead, Dorking, London, Chessington, Kingston upon Thames, Tunbridge Wells, Surrey, West Sussex, East Sussex & Kent.